User Manual

4.2.2 Measurement Setting (QUALITY-Swell, Dip, INT Measurement) KEW6310

KEW6310 4.38

Setting for interval

Interval is a sp a ce o f the ti me betw een da t a savi ngs; da t a is saved in a CF ca rd or Inte rnal memory.

* Default value (or after system reset) : 30 min

* Setting procedure is same to that for interval Setting for W/ Wh/ DEMAND.Refer to the procedure described in

the preceding pages.

Setting for reference voltage

70 ~ 1000V (can be set by 1V)

* Default value (or after system reset) : 100V

1 Press the Cursor Keys and select [V_Reference], and then press the ENTER Key.

2 Press the Cursor Keys and alter values, and then press the ENTER Key.

Box with ▲▼ mark appears

at the rightmost digit.

Selected reference voltage

is dis

ed.