User Manual

4.2.2 Measurement Setting (QUALITY-Swell, Dip, INT Measurement) KEW6310
KEW6310
4.42
Setting for int (short interruption)
5 ~ 98% (can be set by 1%)
* Default value (or after system reset) : 10%
1 Press the Cursor Keys and select [Short interruption], and then press the ENTER Key.
2 Press the Cursor Keys and alter values, and then press the ENTER Key.
Lower limit varies depending on the selected reference voltage. Alter the reference voltages to
change the lower limit.
Box with ▲▼ mark appears
at the rightmost digit.
Selected int value is
displayed .