User Manual

KEW6310 4.2.2 Measurement Setting (QUALITY-Transient Measurem ent)
KEW6310 4.48
Setting for interval
* Default value (or after system reset) : 30 min
* Setting procedure is same to that for interval Setting for W/ Wh/ DEMAND.Refer to the procedure described in
the preceding pages.
Setting for voltage range
150/ 300/ 600 / 1000V
* Default value (or after system reset) : 1000V
1 Press the Cursor Keys and select [V Range], and then press the ENTER Key.
2 Press the Cursor Keys and select a Volt age Range and then press the ENTER Key.
Drop down list app ears.
Selected Voltage Range
is displayed .