User Manual

4.2.2 Measurement Setting (QUALITY-Transient Measurement) KEW6310
4.49 KEW6310
Setting for threshold
Volt age Ra nge 150V 300V 600V 1000V
Threshold
(on 1V basis)
50~310Vpeak 90~630Vpeak 170~1270Vpeak 340~2000Vpeak
* Default value (or after system reset) : 1415V
* Vrms value (Vpeak divided by 2 ) is auto ma tica lly ca lcul ate d w hen Vpe a k is se t.
1 Press the Cursor Keys and select [Threshold Value], and then press the ENTER Key.
2 Press the Cursor Keys and alter the values, and press the ENTER Key
to fix it.
Box with ▲▼ mark appears
at the rightmost digit.
Selected threshold value is
displayed . Value display ed in
parenthesis is a threshold value
divided by 2.