User Manual

4.2.2 Measurement Setting (QUALITY-Voltage Unbalance Ratio KEW6310
4.53 KEW6310
Setting for unbalance rate measurement
For the details of V oltage Unbalance Rate Measurement, refer to “1 1 .5 U n ba la nc e Ra te ” in this manual.
Setting Items
Interval : set interval time
Output threshold
:
set threshold for the output of voltage unbalance rate
Setting for interval
* Default value (or after system reset) : 30 min
* Setting procedure is same to that for interval Setting for W/ Wh/ DEMAND.Refer to the procedure described in
the preceding pages.
Setting for output threshold
1 ~ 20% (can be set by 0.1%)
* Default value (or after system reset) : 3%
1 Press the Cursor Keys and select [Output Threshold], and then press the ENTER Key.
2 Press the Cursor Keys and alter values, and then press the ENTER Key.
Box with ▲▼ mark appears
at the rightmost digit.
Selected output threshold
is displayed .