User Manual

KEW6310 4.2.2 Measurement Setting (QUALITY-Flicker)
KEW6310 4.54
Setting for Flicker measurement
For the deta ils o f Flicker mea surement, re fer t o “11.6 Flicker measurement” in this manual.
Setting Items
V Range ： select a desirable Voltage Range（150 ～600V）
Filter
：
select a visibility filter for flicker calculation
Output item
：
set conditions for output to Output terminal
Output Threshold
：
select a threshold value for Output terminal
Setting for voltage range
150／300／600V
* Default value (or after system reset) : 300V
* Setting procedure is same to that for Voltage Range described in the clause of “Setting for Transient
measurement“. Refer to the procedure described in the preceding pages.
Setting for Filter
Follow the p rocedu re be low and select any filt er facto r.
230V／120V／100 V
* Default value (or after system reset) : 230V
1 Select any desirabe [Filter] with Cursor Key and press the ENTER Key.