User Manual

4.2.2 Measurement Setting (QUALIT Y-Flicker) KEW6310
4.55 KEW6310
2 Select a desirable filter factor with Cusor Key and press the ENTER Key.
Setting for Output item
Follow the procedure below to make setting for output items. (conditions for output to Output terminal)
Pst(1min)PstPlt
* Default value (or after system reset) : Pst(1miin)
* wher e :
Output item = Pst, Output threshold = 1.0,
threshold check is done when Pst is refreshed (every 10 min)
1 Select any desirable [Output item] with Cursor Key and press the ENTER Key.
2 Select a desirable filter factor with Cusor Key and press the ENTER Key.
Drop down list app ears.
Selected filter factor
will be displayed.
Drop down list app ears.
Selected output item
will be displayed.