User Manual

4.2.2 Measurement Setting (QUALIT Y-Capacitance calculation KEW6310
4.57 KEW6310
Setting for cap acitance calculation
For the details of unbalance rate Measurement, refer to “11.7 Cap a ci tanc e Ca lcu lat io n” in this manual.
Setting items
Interval : select interval
Target power factor :
simulatin g pow er fac tor cor rec tion w ith capacitor ba nk s
Setting for interval
* Default value (or after system reset) : 30 min
* Setting procedure is same to that for interval Setting for W/ Wh/ DEMAND.Refer to the procedure described in
the preceding pages.
Setting for t a rget power factor
0.5 ~ 1 (can be set by 0. 001)
* Default value (or after system reset) : 1.000
1 Press the Cursor Keys and select [Target PF], and then press the ENTE R Key.
2 Press the Cursor Keys and alter values, and then press the ENTER Key.
Box with ▲▼ mark appears
at the rightmost digit.
Selected target power
factor is displayed.