Datasheet

Capable of measuring AC and DC current up to 100A

with the newly developed open current tester

Capable of measuring AC and DC current up to 100A

with the newly developed open current tester

• True RMS reading is an essential feature for accurate measurement (see rear page).

• " Non Contact " voltage function indicates the presence of AC voltage by warning

the user with an audible signal.

• Set the DC current range to zero in one touch with the Zero Adjust function

• Auto Power Off

• Data Hold (AC A / DC A only)

• Designed to international safety standard IEC61010-1 CAT.

3 300V

( Actual Size )( Actual Size )

MODEL 2300R

KEW FORK 2300R can be used in crowded connection boxes, where cables are very short,

and space is too limited to clamp cables using with a traditional clamp meter.

KEW FORK

ISO 9001/EN 29001/BS 5750

APPROVED BY BVQI

PAGE 1
ISO 9001/EN 29001/BS 5750 APPROVED BY BVQI ( Actual Size ) Capable of measuring AC and DC current up to 100A with the newly developed open current tester • True RMS reading is an essential feature for accurate measurement (see rear page). • " Non Contact " voltage function indicates the presence of AC voltage by warning the user with an audible signal.
PAGE 2
Instrument Layout Data Hold/DC Zero Adjust Button Function Switch (press for 2 seconds) Fork Core LCD Display True RMS (Root Mean Square value) Measurement Averaging Value True RMS Value When load current is not affected by the distortion, both averaging value type and true RMS (root mean square) type clamp meters show the almost same value of about 10A with constant wave-form as the above display samples.