User Manual
Table Of Contents
49
ACCEL
ABS
WIDTH
0FF
N
FB
CYCLE
OFF
15
WIDTH
CYCLE
15
%
%
CYCLEサイクル
CYCLE Throttle Cycle
Add a change to the operation of throttle brakes.
▶ ACCEL Throttle Acceleration
Modify the amount of acceleration burst of the throttle.
▶ ABS
Modify the amount of brake pumping.
Just like professional drivers who are capable of
precise throttle inputs, this function enables ne
throttle adjustments to allow quicker cornering.
To prevent tires from locking up during sudden braking,
brake pumping will be applied.
【Setting Range】
WIDTH : OFF 〜 100%
(Default : OFF)
CYCLE : 1 〜 30
(Default : 15)
【Example】
By setting the throttle to feather automatically, the
car could be made to grip and corner faster on low-
grip surfaces.
【Example】
This function is eective when your car's wheels lock
up under braking and disturbs the car's balance. It
will help enable smooth cornering performance.
【Setting Range】
WIDTH : OFF 〜 100%
(Default : OFF)
CYCLE : 1 〜 30
(Default : 15)
▶ ACCEL Throttle Acceleration
▶ ABS
[CYC] Display on the Function Monitor!
If [WIDTH] is not set to OFF, [CYC] will be displayed on
the initial screen's function monitor. If the key assigned
to CYCLE is pressed while at the initial screen, [CYC] will
disappear from the function monitor.
[CYC] Display on the Function Monitor!
If [WIDTH] is not set to OFF, [CYC] will be displayed on
the initial screen's function monitor. If the key assigned
to CYCLE is pressed while at the initial screen, [CYC] will
disappear from the function monitor.
If [CYCLE] is set at a large value, the ESC operation
frequency will increase.
How effectiveness of actual ABS is different in your
vehicle performance.
When "ACCEL" and "ABS" either one or both become
eective, "CYC" is displayed at the same position of the
initial screen.
If [CYCLE] is set at a large value, the ESC operation
frequency will increase.
For each setting, different optimal numerical value in a
variety of factors, such as your car, the road surface.
Conduct test drives to nd the best setting values.
Setting [WIDTH] to 0 will deactivate Acceleration.
Setting [WIDTH] to 0 will deactivate ABS.
P
P
P
P
P
P
P
P
P