User Manual
Table Of Contents
STTURN 50
%
STRETURN100
%
ターンスピード
リターンスピード
STSPEEDスピード
STTURN 100
%
STRETURN100
%
ターンスピード
リターンスピード
STSPEEDスピード
STTURN 50
%
STRETURN100
%
ターンスピード
リターンスピード
STSPEEDスピード
STTURN 100
%
STRETURN100
%
ターンスピード
リターンスピード
STSPEEDスピード
17
【 Basic Operation 1: Selecting from a Menu 】
This explanation uses [Steering] as an example.
① Use the R(>) key to move the cursor over [Steering].
② Press the ENTER key to change to the Steering Menu screen.
【 Basic Operation 2: Changing a Setting Value 】
This explanation uses [TURN 1] on the Steering Speed screen as an example.
① Use R(>) key to move the cursor over the 100% value next to [ST TURN].
② Press ENTER key to select it for modication.
③ Once selected, the cursor will blink. Now use the L(<)key+R(>)key to change the value.
④ After changing the value, press the ENTER key again to conrm the change.
■
Display and Control Method with the Xpansion unit attached
● Basic Operations to Change Settings
BACK Key L( < )Key R( > )Key
Command Button
Communication port
Used for rmware upgrading.
Used for rmware upgrading
and ICS communication.
ENT Key
Controlling of the setting adjustments is done via the L(<) key, R(>)key,
ENTER(ENT) key, and BACK key.
Operation
ENT Key:
Selecting item to be modied; Conrming a change after a setting change.
L( < )Key:
Used to move cursor between menu choices and to change a setting value.
Lowering a value (for L/R cases: raising toward L); Return to a previous menu item.
R( > )Key:
Used to move cursor between menu choices and to change a setting value.
Raising value (for L/R cases: raising toward R); Proceed to next menu item.
BACK Key:
Returning to previous screen; Canceling change
L(<) key + R(>) key Pressing simultaneously:
Resets the value to default setting.