Manual

12
Auto Programs
4D Massage Programs
MyMassage™ Memory Programs
Getting Started
When massage chair is operating, press the AUTO
button on the remote control to enter Auto Program
Menu. Choose from Recover, Stretch, Back Relief,
Night, Upper Body, Lower Body, MyMassage 1,
or MyMassage 2. Press OK to enter the program
you desire. Selected program will show on the home
screen.
As well as the programs in the AUTO section, there
are 3 additional 4D Massage programs. To access,
select 4D MASSAGE from Home display, navigate
to MODE and then choose from Yoga, Deep
Kneading, or Stress Relief. Press OK to enter the
program you desire. Selected program will show on
the home screen.
To adjust the intensity or region of your 4D
Massage, press up or down button to navigate
among: FORCE and PART.
Your chair has the ability to save your favorite
customized massage programs to memory. To do
this, create a manual massage program (see page
18 for instructions) with all of your desired air, heat,
speed, and intensity settings.
Storing a memory program:
After creating your custom massage in manual
mode, select AUTO from the Home display and
scroll to the bottom of the page. Here you will see
MyMassage 1 and MyMassage 2. Press OK button
to select either 1 or 2 then select “Save”. If you save
over the top of an existing memory program, the
existing program will be erased and replaced by the
most recent save.
Loading a memory program
Select AUTO from Home display and
scroll to the bottom of the page. Select
MyMassage 1 or MyMassage 2 and
then select “Run”. The chair will now
run the program you created.