User's Manual

Setting Up Your IMW575 Bluetooth Music Receiver
Bluetooth Device Compatibility
Your speaker connects with all Bluetooth devices that support the A2DP profile including iPads, iPhones, iPod
touches, and most smart phones, laptops and tablets.
Pairing a Bluetooth Device with Your Speaker
Press and hold the “POWER” button for two seconds to turn on the unit. The Bluetooth LED light will start
blinking slowly. Now you are ready to pair your device with your IMW575 speaker.
1. Go to the Bluetooth Manager of your Bluetooth device.
2. Search Bluetooth devices and select “IMW575” to start connecting.
3. Enter “0000” if your device asks for the PIN code.
4. Once paired, the unit will say, “You are now paired, enjoy” and the Blue LED light will turn on steadily.
5. Although the unit can only stream audio from one device at a time, it is capable of being paired with up to
eight devices. This means that you only have to enter the PIN code one time for each device.
Connecting a Paired Bluetooth Device
1. You should only need to pair your Bluetooth device with your speaker one time.
2. The next time your Bluetooth device and the unit are in range of each other, and the Bluetooth feature is
turned on, they should automatically connect.
3. The unit will only automatically connect to the last Bluetooth device it was connected to.
4. If your paired device does not automatically connect, navigate to the Bluetooth menu on your device and
select “IMW575” from the list.
Note: Your IMW575 can pair with and remember multiple Bluetooth devices; however it can only connect with
one device at a time. For more detailed instructions, please visit the FAQ section.