SMART KEY READER User’ Manual 2019. 04. 03 Prepared(작성) Reviewed(검토) Approved(승인) Park moonsang www.kyungwoo.com Copyright © 2014 Kyungwoo Systech Inc.
SMART KEY READER USER’MANUAL Rev (1.0) Revision History Rev. 날짜 1.0 2019.04.03 www.kyungwoo.com 수정 내용 First Release 담당 Park moonsang Copyright © 2014 Kyungwoo Systech Inc.
SMART KEY READER USER’MANUAL Rev (1.0) – Contents – Revision History 1. Synopsis 2. Product Image 3. Block Diagram 4. Specification www.kyungwoo.com Copyright © 2014 Kyungwoo Systech Inc.
SMART KEY READER USER’MANUAL Rev (1.0) 1. Synopsis This do cument is specifi cally-written manual for SMART KEY READER which is receiver and transmitter of wireless communication, which is to confirm user identifications under engine-start limiting function in heavy equipments. SMART KEY READER is defined as followings; SMART KEY READER transmits a signal pattern by RFID 125 KHz in order to wake up SMK TAG. And then SMART KEY READER communicates with SMK T AG by 2.4 GHz Zig bee wireless signal.
SMART KEY READER USER’MANUAL Rev (1.0) 2) Dimension www.kyungwoo.com Copyright © 2014 Kyungwoo Systech Inc.
SMART KEY READER USER’MANUAL Rev (1.0) 3) Certification LABEL location 3. Block Diagram SMARTKEY READER CLUSTER Inductive data SMARTKEY TAG LF LF ANT MCU MCU Transceiver - UHF UHF + CAN 3V BATTERY CAN Network CAN UHF data 12V or 24V, GND + - 24V BATTERY 4. Specification 4.1. Operating Specification -. Must transmit a signal of RFID 125 KHz as a wake up pattern signal. -. Must be activated from 12 Vdc/24 Vdc external voltage supply. -.
SMART KEY READER USER’MANUAL Rev (1.0) -. Water-Proof Specification: IP00 -. Communication with equipment: CAN2.0 250Kbps/500Kbps (*It is recommended to use twist shield cable and should be connected through a short distance as possible.) -. Material of Device: PC (Substance : 3025N1, Flame Class : V0, Manufacturer : SAMYANG) -. PCB Material object/part No. SMK READER B/D PCB manufacturer/ trademark type/model technical data UL No.
SMART KEY READER USER’MANUAL Rev (1.0) FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
