User's Manual

Page 8
3. RF Signal Adjusting
 RF Signal Adjusting
After the CPE outdoor unit has installed, the direction of antenna’s azimuth and pitch angle needs to
adjust for the best signal strength. In near line of sight condition, the CPE will have the best signal
when the antenna is directly pointing the base station.
User can adjust the holder to change the direction and angle of the antenna while observing the RF
LED on the outdoor unit which indicates the signal strength.
 Wireless Link Status
The user can further view more detailed wireless link through the WEB GUI interface under the
device status link. The following wireless link information can be displayed.