User's Manual

Page 10
3.3. LTE Configuration
 Radio Settings-ND&S Configure
There is a LTE radio button which is used for the user can turn the radio on or off to restart the
LTE module.
The CPE would scan frequency auto as soon as the system has completed the startup
procedure, and you can configure the fixed Frequency manual as follow:
Note: After configure any parameters of the device, you must click the “Save & Apply” button to
save the configuration otherwise the configuration will not take effect.
 APN Setting-Bearer configure
The Bearer List is design for the operator to configure the APN. You can configure the only one
APN for all the service classes, as follow:
And the operator also can configure two APNs for Manage and data service classes. As follow
picture, the Management Data Class will be transport via the “internet1“ network and the Data
Traffic Class will be transport via the “internet2” network.