User Manual

3-IN-1 CAR PHONE HOLDER
OVERVIEW
USER MANUAL
Model : KW-600
Clamp Arms
Sponge pad
Bottom Tray
Grip Nut
Release Button
Release Button
TIPS FOR USING THE SUCTION CUP
1.Clean the dashboard or windshield whereyou need to install the car phone
mount with a alcohol wool or a wet cloth ,wait for it to dry.
2.After attach the suction cup ,press down the suction cup lock totally to fix it.
3. It will reduce the adsorbability when stick the suction cup on the curved
surface,plush cloth surface or uneven surface.
4.It is not recommended to attach the suction cup to leathers,walls or
film-coated surfaces since the suction cup is designed with strong suction
power which may cause surface damage.
5.If the suction cup is used frequently in high temperature,low temperature
or humid conditions ,the adsorption forces would be lower (Please avoid to
exposit it to the sun directly).
6.If the suction is not sticky enough after usage,please take dowm the suction
cup base and wash it with warm water.It will be sticky again after drying.
7.Please guarantee the suction cup is covered by plastic wrap if the suction
cup holder is removed
Ball Joint
Suction Cup Lock
Length Adjustment Knob
(Adjust the Length of the Arm)
Suction Cup
Telescopic Arm
Angle Adjustment Knob
(Adjust the Angle of the Arm)
Clip
(This accessory is required
when installing in the vent)
COMPONENT CONNECTION
USING STEPS
Scan the QR code to follow more services
Dear customers friends:
If you have any problem, please feel free to contact our email
we will promptly provide resolve the issues.
http://www.szkzed.com
[e-mail]
1. Remove the clamping nut from the installation, assemble and
lock it
2. Find a suitable place, attach the car mount.
1.Press the release button on the back of the car mount then the
clamp arms open automatically.
2.Put the phone in the car mount then press the clamp arms to
grasp the phone.
1 2
3 4