Install Manual Part 1

SKY497
Installation Manual
1-13
Rev. C
1.4.3 Directional Antenna
PART NUMBER: 805-10890-001
SIZE: 1.3 inches (3.25) cm high
6.23 in (15.82 cm) wide
11.12 in (28.24 cm) deep
WEIGHT: 2.3 lb (1.04 kg)
SPEED: Rated to 600 knots (0.9 Mach) @ 25,000 feet.
FREQUENCY: 1030-1090 MHz
TSO CATEGORY: C118
ENVIRONMENTAL
CATEGORY: DO-160C F2-AC(CLM)XSFDFSXXXXXXXL(2A)X
FINISH: Gloss white Skydrol resistant polyurethane paint
1.5 INTERFACE
The electrical characteristics of all input and output signals are detailed in Appendix A.
1.6 EQUIPMENT REQUIRED NOT SUPPLIED
Antenna Sealant For pressurized aircraft, use a sealant that meets the requirements of SAE
AMS-S-8802 such as Flamemaster® CS3204 class B. For non-pressurized
aircraft, use a non-corrosive sealant that meets the physical requirements
of MIL-A-46146 such as General Electric RTV162.
System Cables The installer will supply all system cables. Cable requirements and
fabrication are detailed in para 2.6.
Connector Installation Antenna Cables See Table 2-2.
Tool M22520/5-01
Die M22520/5-19 (EMTEQ Cable PFLX195-100)
Die M22520/5-43 (EMTEQ Cable PFLX240-100)
Die M22520/5-35 (EMTEQ Cable PFLX340-100)
Die M22520/5-19 (ECS Cable 311601)
Die M22520/5-61 (ECS Cable 311201)
Die M22520/5-21 (ECS Cable 310801)
Die 190318 (PIC Cable S33141)
Die 190418 (PIC Cable S22089)
Die 190618 (PIC Cable S55122)
P1 Interconnect Crimping Tool M22520/2-01
Positioner M22520/2-07
Insertion MS27495 A22M
Removal MS27495 R22M