User Guide Part 2
Table Of Contents
- Chapter 2 Operating Instructions
- Controls & Indicators
- Turn On the SKY497
- Run the Operator-Initiated Self Test
- Switch Between Standby and Normal Operating Mode
- Change the Display Range
- Change the Altitude Display Mode
- Switch Between SKYWATCH and STORMSCOPE Modes (Optional)
- Observe the Display
- Respond to Traffic Advisories
- Turn Off the SKY497 and the Optional WX-1000
- Failure Response
- Operate the Optional WX-1000 When the SKY497 is Removed
- Operate the SKY497 When the Optional WX-1000 is Removed
- Chapter 3 Principles of Operation
- Chapter 4 Display Interpretation
- Chapter 5 Specifications
- Chapter 6 Warranty Information
- Record of Important Information
- Back Cover