User guide

Kerosene Heaters
PARTS IDENTIFICATION
Model
Item Description K600
1 Upper Shell 130-21889
2 Screw, #10-16 x 1/2” 130-20805
3 Combustion Chamber & Shield 130-21890
4 Bushing 130-20931
5 Air Deflector 130-21891
6 Burner Head Assembly N/A*
7 Photocell Assembly 130-21892
8Fan 130-21893
9 Fan Guard 130-21894
10 Fan Switch 120-20938
11 Fan Switch Cover 120-20939
12 Sleeve 130-20941
13 Screw, #10-16 x 3/8” 130-20806
14 Motor and Pump Assembly N/A*
15 Hex Nut, 1/4-20 130-20818
16 Clip Nut 130-20936
17 Screw, #12-14 x 1/2” 130-20815
18 Bushing 130-20932
19 Lower Shell 130-21895
20 Fuel Line 130-21896
21 Power Cord 120-20892
22 Support Bracket 130-21897
23 Screw, 1/4-20 x 3/8” 130-21898
24 Front Handle 130-21899
25 Screw 1/4-20 x 1 1/2” 130-20816
26 Fuel Cap 130-20944
27 Filler Neck Screen 130-20946
28 Wire Harness 130-21900
29 Rear Handle 130-21901
30 Fuel Line Assembly 400-21902
31 Ignition Boot 120-20891
32 Electronic Ignitor 120-20890
33 Fuel Tank 130-21903
34 Screw, 1/4-20 x 2 3/4” 130-21904
35 Wheel Support Frame 130-21905
36 Axle 130-20848
37 Drain Plug 130-20945
38 Screw, #6-32 x 3/8” 130-21906
39 Thermostat 120-20898
40 Thermostat Bracket (Black) 130-21907
41 Wheel 130-20847
42 Cotter Pin 130-20824
43 Flatwasher, 5/8” 130-20823
44 Wheel Spacer 130-20849
45 Photocell Bracket 130-21908
46 Screw, #6-32 x 3/8” 130-21909
47 Screw, #10-16 x 3/4” 130-20807
Internal Lockwasher No. 6 (Standard Hardware Item)
Nut, 6-32 (Not Shown) 130-21910
* Not available as complete assembly. See breakdown of motor and pump components on page 6.19.
9.2-226.17