User's Manual

http://www.L‐com.com

ASCII characters.

z If a 128-bit WEP key is used, enter 26 Hexadecimal characters or 13

ASCII characters.

z Authentication: LEAP

Authentication –Change authentication method.

Identity –Enter your identity for the LEAP authentication service.

Password–Enter your password for the LEAP authentication service.

Domain Name–Enter your domain name for the LEAP authentication service.

z Authentication: WPA and WPA2

Authentication –Change authentication method.

Encryption–Select the encryption method to be used.

z AES (Advanced Encryption System) uses symmetrical 128-bit data

block encryption.

z TKIP (Temporal Key Integrity protocol) uses stronger encryption

algorithms and MIC (Message Integrity Check) to provide security

against hackers.

WPA and WPA2 use IEEE 802.1x protocol for authentication. After selecting

encryption method go to 802.1x Tab, where 802.1x settings can be configured.

z Authentication: WPA-PSK and WPA2 PSK