User's Manual

http://www.L‐com.com
29
Apply–Click to save DLS and add it to the list.
Tear Down–Select DLS from list and click this button to remove it.
WPS Tab
The primary goal of Wi-Fi Protected Setup (Wi-Fi Simple Configuration) is to
simplify the security setup and management of Wi-Fi networks. Ralink STA as an
Enrollee or external Registrar supports the configuration setup using PIN
configuration method or PBC configuration method through an internal or external
Registrar.
WPS AP List –Display the information of surrounding APs with WPS IE from last
scan result. List information includes SSID, BSSID, Channel,ID(Device Password
ID), and Security-Enable.
Rescan–issue a rescan command to wireless NIC to update information on
surrounding wireless network.
Information–Displays information about WPS IE on the selected network. List
information includes Authentication Type, Encryption Type, Config Methods,
Device Password ID, Selected Registrar, State, Version, AP Setup Locked,
UUID-E and RF Bands. Details can be found in Detail network information
section.
PIN Code–8-digi numbers. It is required to enter PIN Code into Registrar using
method. When STA is Enrollee, you can use Renew button to re-generate new
PIN Code.
Config Mode–Our station role-playing as an Enrollee or an external Registrar.
WPS Profile List–Display all of credentials got from the Registrar. List
information includes SSID, MAC Address, Authentication and Encryption Type. If