User's Manual

http://www.L‐com.com

About Tab

This Tab contains driver, application and network adapter information.

RaConfig Version–Shows the version of the RaConfig application.

Driver Version–Shows the current driver version.

Date–Shows the application/driver release date.

EEPROM Version–Shows the current EEPROM revision.

Firmware Version–Shows the current firmware version.

Phy_Address–Shows the adapter’s physical address (MAC).

Troubleshooting

This chapter provides solutions to problems that may occur during the installation

and operation of the wireless USB adapter.

1. The Wireless USB Adapter does not work properly.

z Reinsert the Wireless Adapter into your PC’s USB port.

z Right click on My Computer and select Properties. Select the device

manger and click on Network Adapter. You will find the Adapter if it is

installed successfully. If you see the yellow exclamation mark, the

resources are conflicting. You will see the status of the Adapter. If there

is a yellow question mark, please check the following:

z Make sure that your PC has a free IRQ(Interrupt Request, a hardware

interrupt on a PC).

z Make sure that you have inserted the right adapter and installed the

proper driver. If the Adapter does not function after attempting the above

steps, remove the adapter and do the following: