User Manual

Any changes or modifications of equipment not expressly approved by the
manufacturer could void the user’s authority to operate the equipment and the
company’s warranty.
NOTE: Certain high gain antennas are intended for point-to-point or point-to-
multipoint applications only. These antennas are clearly identified in the table
contained in this manual. Note that +36 dBi may only be exceeded for point-to-
point applications as given in 15.247(b). It is the installers responsibility that
when using these antennas to ensure that the system is used exclusively for
point-to-point operations, and that the antenna may not be co-located with other
intentional radiators transmitting the same information". The device and its
antenna and must not be co-located or operating in conjunction with any other
antenna or transmitter.
The table contained in this manual identifies which antennas are considered
“fixed” and which are “mobile”. When this device is installed as a fixed-mount
application there is a minimum required separation distance of 100 cm between
the antenna and all persons during normal operation. All mobile antennas must
be mounted at a minimum distance of 20 cm from users.
Copyright © This drawing is property of L-com Global Connectivity. All rights reserved.
L-COM, INC. 45 BEECHWOOD DRIVE NORTH ANDOVER, MA 01845
WWW.L-COM.COM E-MAIL: [e-mail] PHONE: [phone] FAX: [phone]
© L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com logo are registered marks.