User's Manual

PC Card and Software Installation
I. Network Configuration
XI-325 is an IEEE802.11b-compliant PCMCIA Type II DSSS wireless LAN PC card.
It fully supports wireless networking under Windows 95/98/2000/XP and NT 4.0.
 XI-325 can be operated in Ad-Hoc and Infrastructure network configurations. Ad-Hoc mode
allows XI-325 users to join an Basic Service Set (i.e., peer-to-peer mode, without access point).
Infrastructure mode allows XI-325 users to join a Extended Basic Service Set (i.e., connect to
access point)
II. Package Content
XI-325 11Mb PC Card CD-ROM Utility Disk
Amplifier Kit (Optional) Antenna
III. XI-325 and Utility Installation under Windows
1. Insert the XI-325 card into the PCMCIA slot, then start Windows. Windows will auto-detect
new hardware and Windows Wizard will display “New Hardware Found".
2. Click on ‘Next’, then insert the corresponding driver and utility CD-ROM into the CD-ROM
drive, or the driver and utility disk into the floppy drive. Click on ‘Next’.
3. Once [Insert Win 95/98/2000/XP CD-Rom into the appropriate drive, then click ‘OK’] window
appears, please follow by either inserting the Windows CD-Rom or finding the Windows
source path within the appropriate drives, then click ‘OK’.
4. Click ‘Finish’ to complete the installation . Restart Windows.
5. To install the XI-325 Utility, insert the XI-325 driver and utility disk once again, then
execute A: setup.exe.
6. Follow the on-screen instructions to complete utility installation, then afterward double-click on
Infrastructure Network
Ad-hoc Network
Wired Network
Wireless Network
Access Point