Welcome to L’EQUIP, Inc.! You’re now the proud owner of L’EQUIP’sTM Model 221. This luicer was designed with your convenience in mind - you W I I I appreciate its ease of operation as you enloy the delicious and healthy juices it gives you Introduction The L’EQUIPTM Model 22 1 comes almost completely assembled in the box.
Assembly - Always make sure the juicer is unplugged before beginning assembly. 1 Place the iuicebowl on top of the motor base Two tabs located on the underside of the iuicebowl should rest in two accompanying slots on top of the motor base. (The tabs and slots are by each clamp.) 2. Set the blade/basket on the hub in the center of the juicebowl, and press down until it feels snug. 3 Gently rotate the blade/basket to ensure that it turns freely.
Optional Bag Attachment 1 Place the bag attachment onto juicer. 2. Separate clamps 3. Be sure to place back of bag underneath plastic cover as indicated. I 4. Place front of bag in between the two attachments as shown in photos 4 - 6. Cleaning Your Juicer -‘-’ All parts are washable in warm soapy water except the motor base. ii Use any liquid dishwashing detergent. Do not use any products containing ammonia, bleach or scouring powders. These products will dull, scratch or mar the plastic surface.
Disassembly Always make sure the iuicer is unplugged before beginning disassembly. 1 Remove the clamps by bracing each thumb on the top or middle of each clamp. 2. and use one or two fingers to pull out the bottom of each clamp let the clamps hang from the sides by the lower hinges. 3 lift up the clear cover from the juicer 4 Lift off the iuicebowl and blade/basket as one piece These two pieces will then easily come apart for cleanrng.