User's Guide

TO GET STARTED
1. Plu g in a 9‐volt DC power supply (provided).
2. Plug your guitar into the INPUT of the Voiceprint DI (upper right hand side of the box) and a cable to either the 1/4” OUTPUT
(upper left hand side) or the XLR output located on the back panel of the unit.
3. Plug the output cable into your amp or PA t o listen b ack to your Voiceprint after you’ve made one. To learn more about the
Voiceprint creation process, reference the Acoustic Live app. To learn more about the specifics of the Voiceprint DI, continue on
with this manual.
TOP
A. Anti‐FB
This control is used to adjust the mix of your Anti‐Feedback profile. When turned counterclockwise to 0, the Anti‐Feedback
profile will not affect the signal. Turn clockwise to add Anti‐Feedback profile.
Additionally, clicking this knob will invert the phase.
*For more in depth Anti‐FB control, reference the Acoustic Live app.
B. Voice
This control is used to adjust the mix of your Voiceprint, your guitar’s one‐of‐a‐kind voice. When turned counterclockwise to 0,
the Voicepri nt will not affect the signal. Turn clockwise to add Voiceprint profile.
Additionally, a long press of this knob will enter Bluetooth pairing mode.
*For setting up a Voiceprint and more in depth Voiceprin t control, reference the Acoustic Live app.
C. Select
This control is used to select which of your paired Voiceprint and EQ presets to use. The Voiceprint DI can hold up to 100 presets.
Turn clockwise to scroll up and counterclockwise to scroll down. The highlighted preset will flash on the digital display. Click the
knob to activate the currently selected preset slot. If you idle for too long or click on a slot that does not have a preset saved in it,
the Voiceprint D I will default back to the previously selected preset slot.
*For more in depth control over your preset library, visit the Acoustic Live app.
D. Volume
This is a Master Volume that functions independently from the Acoustic Live app. This will control the levels of both the ¼” out
and the XLR out. B oth of th ese outputs will be muted when the Mute footswitch is engaged.
E. Pad
The p ad switch is used to attenuate the input by 0 dB (no change), ‐3dB, ‐6dB, or ‐9dB. Adjust this depending on the output of
your pickup. A visual indicator of the pad’s level will appear on the digital display when the switch is use d .
F. Mute
This footswitch is used to mute the signal from both the ¼” out and the XLR out. A solid light will appear above the footswitch
whentheMuteisengaged.
Additionally, this footswitch can be held to engage a Bypass function. Visual indicators of the Bypass function include a flashing
light above the footswitch and BYP on the digital display.
G. Next
This footswitch is used to scroll through the stored presets on the Voiceprint DI. Press the footswitch to activate the next stored
preset.
Side
A. DC Input
The D C power input is designed for a standard 2mm plug commonly used with effects pedals and “floorbox” products. A power
supply is provided with the Voiceprint DI. M ost power supplies or multi‐power devices designed for musical products may be
used. 9VDC recommended with a 12VDC maximum. Plugging in a power supply will activate the Voiceprint DI.