User Manual

NovaRoam EH900 User Manual
V. 1.1
Page 30
Option Name Description
Data Rate
Specifies the over-the-air (burst) Data Rate of the
NovaRoam. Data Rates can be specified as 100 kbps or
400 kbps. The default data rate is 100 kbps.
Network ID
Specifies the Network ID for the NovaRoam. In order to
communicate with each other, NovaRoams must use the
same Network ID. Networks can be collocated by using
a separate Network ID for each individual network.
Hop Interval
The amount of time a NovaRoam will remain on a single
hopping frequency. Options are short, medium, long,
extended.
Beacon Interval
Amount of time between beacon transmissions. Options
are short, medium, long, extended.
Power Level
Specifies the output power of the NovaRoam. Options
are 10 dBm, 20 dBm, 25 dBm, and 30 dBm.
Apply
Applies changes made to the Wireless Interface
configuration page
Serial Tab
The serial interface of a NovaRoam can be used to tunnel raw asynchronous
serial data to another NovaRoam. The Serial tab allows you to configure the
various port settings of the asynchronous serial interface as well as the
destination NovaRoam address and port number.