User Manual

Marine Systems

Aviation Recorders

Page 4--5

Initial Issue165M1161--00

Aug. 23/10

Tab le 4--1. HyperTerminal Key Descriptions

Key Trace Message Screen Features System Configuration Menu Features

ESC Takes the screen out of sleep mode

and begins to display trace messages

again

Takes the user back to the previous

screen; Displays a menu exit message

in the main “System Configuration”

Space Bar Stops and restarts the display of trace

messages

Enables and disables some of the fea-

tures by toggling them on or off

C Opens the “System Configuration”

Not Applicable

4.3. System Configuration Menu

An intuitive set of screens set up under the “System Configuration Menu” provides

users with the options needed to configure the AIS AtoN for maintenance--free use.

To access this menu, press “C” in the “HyperTerminal” screen while it is transmitting

trace messages. The window shown in Figure 4--3 appears.

NOTE

: If trace messages are not displayed, press “ESC,” and a “Hit

Any Key to Reboot” message appears. Press any key, so the

system reboots. Press “C” to open the “System Configuration

Menu.”