User Manual

Marine Systems
Aviation Recorders
Page 4--15
Initial Issue165M1161--00
Aug. 23/10
Field
Key
Stroke
Description
Tx T Toggles between “Std” (Standard) and “Back2Back” forms
of transmission; Typically set to “Std,” but special test sce-
narios might require “Back to Back” transmissions
[Slt 0009,Min1] “Shift”
“+”
Sets the slot on which to transmit the message; Press
“Shift” and “+” (plus sign) key to increase the value of the
“base” or “anchor” slot by increments of either 1 or 10, de-
pending upon how the adjustment is set with the “Shift” and
“*” keys
[Slt 0009,Min1] “--” Decreases the value of the “base” or “anchor” slot by incre-
ments of either 1 or 10, depending upon how the adjust-
ment is set with the “Shift” and “*” keys
[Slt 0009,Min1] “Shift” * Toggles the amount the base slot is adjusted between in-
crements of either 1 or 10, allowing for fine control over the
slot
[Slt 0009, Min 1] U Changes the Universal Coordinated T ime (UTC) by incre-
ments of 1 minute, ranging from 0 to 9 minutes
Msg M Cycles through the message types to select a message to
configure
[10 Sec Ivl] I Increases the time between message transmissions by cyc-
ling the slot adjustment to within a range of 2 seconds and
30 minutes (decreases the transmission rate)
[10 Sec Ivl] D Decreases the time between message transmissions by
cycling the slot adjustment to within a range of 2 seconds
and 30 minutes (increases the transmission rate)
Ch A Only / Ch B Only
/ChA/B
Space
Bar
Selects the type of channel used to transmit the message
Action Key V Displays a current view of the schedule
Action Key C Clears all current reservations
After making a change and pressing the “ENTER” button, the “AtoN Transmit Sched-
ule” appears with the message “Hit Any Key to Continue...” Press any key, and the
“Transmit Schedule Setup Utility” screen reappears. Press “Esc” in the main “Trans-
mit Schedule Utility” screen to return to the main “System Configuration Menu.”