User Manual

Marine Systems
Aviation Recorders
Page 4--17
Initial Issue165M1161--00
Aug. 23/10
4.3.7. Set Post--Standby Startup Time
In order to save power, the AIS AtoN goes into standby mode when it does not have
an imminent event to process. The “System Startup Time” defines when the mother-
board needs to wake up from standby mode to prepare for a transmission.
To set the start--up time following standby of the unit, enter “6” in the main “System
Configuration Menu,” and Figure 4--12 appears. Press “I” to increase the value b y 1
second each time the key is hit or “D” to decrease the time by 1 second each time it
is hit. The range of startup times is between 10 and 30 seconds. Press “Enter” to
accept the changes, and the “Press Any Key to Continue...” message appears. Hit
any key to return to the System Configuration Menu.
Figure 4--12. Set the Post--Startup Time