User's Manual
Table Of Contents
- Cover
- 1-Welcome Letter
- 2-Table of Contents
- 3-Contacts
- 4-Quick Start Guide Rev 2
- 5-SIM Registration
- 6-Installation and Operations Rev 2
- 7-Component Maintenance Manual Rev 1
- SERVICE BULLETIN LIST
- RECORD OF CHANGES
- RECORD OF REVISIONS
- LIST OF EFFECTIVE PAGES
- LIST OF EFFECTIVE PAGES
- INTRODUCTION
- DESCRIPTION AND OPERATION
- TESTING AND TROUBLESHOOTING
- DISASSEMBLY
- CLEANING
- CHECK
- REPAIR
- ASSEMBLY
- FITS AND CLEARANCES
- SPECIAL TOOLS, FIXTURES AND EQUIPMENT
- ILLUSTRATED PARTS LIST
Airbus Iridium SATCOM System
165E5733-00 L-3 Aviation Recorders Proprietary
Issue, Rev. 02
21 January 2014
Page 69
Figure 7-14 – UAT Page
To access and modify UAT parameters:
1. Log in with user name and password as Administrator User
2. Click Enter Maintenance Mode.
Note:
The aircraft status must be “On-Ground” to be able to Enter Maintenance Mode.
3. Click the UAT (Security) link on the left-hand side of the screen to open the UAT page.
4. USER NAME: From 4 to 20 upper-case alphanumeric characters
5. PASSWORD: From 4 to 20 upper-case alphanumeric characters
6. SECURITY LEVEL: Select either DATA COLLECTOR (default) or MAINTENANCE or
ADMINISTRATOR.
Up to 20 Users can be configured.
To exit Maintenance Mode:
Upon completion of modifying parameters, click Exit Maintenance Mode for the system to
reboot and the changes to take effect.
Note:
Exiting Maintenance Mode enables all MCDU functions.
If the aircraft status changes to ‘In-Air’ while in Maintenance Mode, the system will reboot
automatically and return to Operational Mode.