User's Manual
Table Of Contents
- Cover
- 1-Welcome Letter
- 2-Table of Contents
- 3-Contacts
- 4-Quick Start Guide Rev 2
- 5-SIM Registration
- 6-Installation and Operations Rev 2
- 7-Component Maintenance Manual Rev 1
- SERVICE BULLETIN LIST
- RECORD OF CHANGES
- RECORD OF REVISIONS
- LIST OF EFFECTIVE PAGES
- LIST OF EFFECTIVE PAGES
- INTRODUCTION
- DESCRIPTION AND OPERATION
- TESTING AND TROUBLESHOOTING
- DISASSEMBLY
- CLEANING
- CHECK
- REPAIR
- ASSEMBLY
- FITS AND CLEARANCES
- SPECIAL TOOLS, FIXTURES AND EQUIPMENT
- ILLUSTRATED PARTS LIST
Airbus Iridium SATCOM System
165E5733-00 L-3 Aviation Recorders Proprietary
Issue, Rev. 02
21 January 2014
Page 55
ISVM LINK: Yellow (NO LINK) no Iridium link if CSQ (Channel Signal Quality) is 0-1;
Green (OK) if CSQ is 2-5
ISDM LINK: Yellow (NO LINK) no Iridium link if CSQ (Channel Signal Quality) is 0-1;
Green (OK) if CSQ is 2-5
GPS LINK: Yellow (NO FIX), Green (OK)
The ARINC tab displays the status of the 16 ARINC 429 RX channels. The status of a configured
function is either ACTIVE (green) or FAULT (red). The ARINC 717 RX configuration is currently not
used.
The DISCRETE IN tab displays the state of the 16 Discrete Inputs. The state of the configured
functional input is either ACTIVE (green) or INACTIVE (blue).
7.1.2 Faults Page
The Faults page provides access to the system fault log (see Figure 7-3), and fault history (Figure
7-4). The FAULT tab displays only currently raised faults, while the HISTORY tab displays all raised
and cleared faults since the last system reboot.
.
Figure 7-3 – Faults Page (Fault Log Tab)
Figure 7-4 – Faults Page (Fault History Tab)