User Manual

Page 20
HMF
control
Sets the amount of cut or boost for the HMF (High Mid Frequency) section.
FREQUENCY
control
This control varies the cut or boost centre frequency for the HMF section.
Control range is 500Hz, CCW to 20kHz, CW.
Q
control
Varies the 'Q' of the cut or boost region for the HMF section.
HF
control
High frequency shelving equaliser. Provides ±15dB cut or boost at 12kHz.
12kHz
switch
Inserts a 12kHz, -6dB/octave filter into the post EQ signal path. The filter is
switched separately from the 4 band EQ and is available when the EQ is
bypassed.
BYPASS
switch
Switches the 4 band equaliser in and out of circuit allowing A-B
comparisons on EQ settings.
Please note that the EQ 'output' on the rear of the unit is post BYPASS and
FILTER.
4.4 OUTPUT SECTION