User Manual

Page 31
ATTACK-RELEASE
Attack and Release are based around two time constants. An initially short
time which reacts to lower level and/or short duration signals, and a longer
time constant for higher levels and/or longer duration.
The outputs of the Expander and Compressor sidechains are combined
and drive both the VCA control port and the Gain Reduction meter.
LINK
The LINK connector allows the RMS detectors of two MPX10s to be joined
together for stereo operation.
GAIN
The GAIN control adds a DC offset voltage to the combined Expander
Compressor sidechain control voltage.
6.3 OUTPUT
The Output level control provides ±20dB gain adjustment. The level meter
displays the ouput of this stage.
The final output stage is a balanced impedance, ground sensing amplifier
which provides a high degree of noise elimination and prevents signal loss
when using long cable runs.