Owner's manual

INSTALLATION
Check the appliance is electrically safe and gas sound when you have nished.
37
Make sure the inner
rail is forwards
ArtNo.102-0011 - Pressure test point
Replace the storage drawer
To replace the drawer in the range, pull the side rails fully out
(Fig.7-13).
At each side, hold the front of the drawer and pull the side
rail forward so that the clips click into position, holding the
drawer to the side rails (Fig.7-14).

Check the appliance is gas sound.

DO NOT use a ame to check for gas leaks.
When using test pressures greater than ½ psig to pressure
test the gas supply system of the residence, disconnect the
range and individual shut-o valve from the gas supply
piping. When using test pressures of ½ psig or less to test
the gas supply system, simply isolate the range from the gas
supply system by closing the individual shut-o valve.

Check the operation of all the burners.
Fig.7-12
Fig.7-13
Fig.7-14