Liquid Propane Instruction Guide

SERVICING - WARNING
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
3
Regulations
Installation of this range must conform with local codes, or in
theabsenceoflocalcodes,withtheNationalFuelGasCode,
ANSIZ223.1/NFPA.54,latestedition.
InCanada,installationmustconformwiththecurrentNatural
GasInstallationCode,CAN/CGA-B149.1orthecurrent
PropaneInstallationCode,CAN/CGA-B149.2,andwithlocal
codes where applicable.
Thisrangehasbeendesign-certiedbyCSAInternational
accordingtoANSIZ21.1,latesteditionandCAN/CGA-22.2
latest edition.
Read the instructions before installing or using this appliance.
This range becomes hot in use, the maintop burners produce
exhaust gases. Take safety precautions - see the safety
warningsintheUserGuide,whichshouldbereadtogether
with this installation guide.
The range must be electrically grounded in accordance
with local codes or, in the absence of local codes, in
accordancewiththeNationalElectricalCode(ANSI/NFPA70,
latest edition). In Canada, electrical grounding must be in
accordancewiththecurrentCSAC22.1CanadianElectrical
CodePart1and/orlocalcodes.
Important
• Observeallgoverningcodesandordinances.
• Therangemustbeproperlygrounded.
• Savetheseinstructionsforthelocalelectrical
inspector’s use.
Whenservicingorreplacinggascarryingcomponents
disconnect from gas before commencing operation and
checkapplianceisgassoundaftercompletion.When
checking for gas leaks use a liquid leak detector at all joints
andconnectionstocheckforleaksinthesystem.Usea
productspecicallymanufacturedforleakdetection.Leak
testing of the appliance shall be conducted in accordance to
the manufacturer’s instructions.
For Your Safety
Do not store or use combustible materials, gasoline or
other ammable vapors and liquids in the vicinity of this
or any other appliance.
If You Smell Gas
• Openwindows.
• Don’ttouchelectricalswitches.
• Extinguishanyopename.
• Immediatelycallyourgassupplier.
Conversion to Propane
ThisapplianceissuppliedsetforNaturalgas.Aconversionkit
forPropanegasissuppliedwiththerange.
If the appliance is to be converted this must be done before
installation. The conversion must be performed by a qualied
LPgasinstaller.Afterconversiontheinstallationmustcomply
with the relevant regulations and also the local electricity
supply company requirements. Read the instructions before
converting this appliance.
Failure to convert the appliance correctly could invalidate any
warranty or liability claims and lead to prosecution.
This instruction must be used in conjunction with the rest
of the appliance instruction, in particular for information on
Standards,rangepositioning,connectionhosesuitabilityetc.
Whenservicingorreplacing gas-carryingcomponents
disconnect from gas before commencing operation and
check appliance is gas sound after completion.
Do not use re-conditioned or unauthorized gas controls.
Orifices
Burner head
ArtNo.311-0034 - Burner head off
A
B
C
D
Brass venturi
Burner base
Burner ring
Removeburnerheads.Undothelargebrassnutsand
remove the brass venturis and rings.
Either:
Usealongsocketwrenchtoaccessandremovethe
old orices.
Or:
Liftupthefrontofthemaintopandpropitupatthe
front. Remove the old orices.
Savetheoricesremovedfromtheapplianceforfuture
use. Install new orices.
Natural Gas Propane Gas
Center burner 205 118
Large Burners 150 99
Right front burner 112 68
Replacetheringsontheburners.Screwinthehexagon
headed venturi to make tting the burners easier. Do not
tighten yet.
Whenalltheburnerbasesandventurishavebeentted
tighten the venturi nuts.