Specification Guide

Gas Inlet Male
1/2 NPT connection
32" (815 mm)
1.6" (40 mm) 1.6" (40 mm)
1.5" (38 mm)
4.3" (110 mm)
31.2" (792 mm)
1.6" (40 mm) 1.6" (40 mm)
15" (380 mm)
FLAMBERGE RÔTISSERIE: BFG
Unit Dimensions: 755 W x 380 D x 725 H (mm)
29.7 W x 15 D x 28.5 H (inches)
Minimum Cutout Dimensions: 760 W x 457 D x 730 H (mm)
30 W x 18 D x 28.7 H (inches)
Dimensions of Metal Trim Frame: 815 W x 792 H (mm)
32 W x 31.2 H (inches)
Crated Weight: 330 lbs; Uncrated Weight: 132 lbs
Voltage: 120v
Available in gas only (Natural or Propane)
Gas – 27,000 BTU Natural or 25,000 BTU Propane
Accessories Included:
2 Metal Spits
1 Fish Basket
1 Porcelain Enamel Drip Tray
Starting from $14,900
Please note: The Centenary Rôtisserie is a UL-Approved product for residential installation.
A gravity flue is not required but may be used as desired. This is a zero clearance product.
Rôtisserie
The Flamberge Rôtisserie is a wall-mounted gas rôtisserie designed for residential use. Constructed with
a concave rear wall of solid cast iron, it is heated by a powerful gas burner set beneath three motorized
spits. Synthetic wicks pull the heat up through the vaulted back of the unit, allowing the radiant heat to
gently cook foods as they rotate slowly on a spit over the flame.
PAGE | 25
PAGE | 24