Specification Guide

PORTE TECHNIQUE 400: PT4
400 W x 665 D x 891 H (mm)
15.7 W x 26.2 D x 35.0 H (inches)
1 Large Door, Left- or Right-hand Hinged
1 False Drawer
Drawer may be made functional for additional cost
Supplied without a shelf or base
Open bottom with 2 Stainless Steel inner sides and back
Shelf may be added: ETS Middle Shelf $500 or ETB Bottom Shelf $600
Starting from $10,100
PORTE TECHNIQUE 500: POT
500 W x 665 D x 891 H (mm)
19.7 W x 26.2 D x 35.0 H (inches)
1 Large Door, Left- or Right-hand Hinged
1 False Drawer
Supplied without a shelf or base
Open bottom with 2 Stainless Steel inner sides and back
Shelf may be added: ETS Middle Shelf $500 or ETB Bottom Shelf $600
Starting from $10,200
PORTE SIMPLE 500: POS
500 W x 665 D x 891 H (mm)
19.7 W x 26.2 D x 35.0 H (inches)
1 Door, Left- or Right-hand Hinged
1 Adjustable Shelf (3 Positions)
2 Stainless Steel inner sides and back
1 Drawer
Starting from $11,100
MEUBLE POUBELLE (WASTE BIN) 500 – TOP: BIN
500 W x 665 D x 891 H (mm)
19.7 W x 26.2 D x 35.0 H (inches)
1 Top Waste Bin
1 Drawer
Two 28L Waste Bins sold separately — $900 (see page 35)
Starting from $10,800
Cuisine de Château Cabinetry
All cabinetry comes open framed; countertops are not included. Stainless Steel countertops are available
to quote. Unfinished Stainless Steel side and back panels are available at no extra charge. Finished enamel
or finished Stainless Steel panels are available for an additional cost (see page 28). All drawers come with a
standard rubber drawer liner. False drawers (decorative trim applied to exterior of non-functioning cabinet
panel) can be made into working drawers for an additional cost. Additional customization available to quote.
Note: All Château Drawer Cabinets may be used as a sink base; when used in this application, please note that the large top drawer or top two small
drawers will not be functional. A shelf may be possible dependent on the sink specified. Porte Cabinets: Select cabinets from the Porte series are open
bottom to allow for compatibility with dishwashers, sinks, varios or other custom applications. Any Porte cabinet can be ordered with a Stainless Steel
bottom, back or side. [These include PTD, POT, PT4, POM, POP] All Château Cabinetry height can be adjusted .5” plus or minus
PAGE | 27
PAGE | 26
170 520
891
400
100
50
914
700
60
630
665
60 570
50
914
700
60
500
170 520
891
100
50
914
700
60
630
665
60 570
50
914
700
60
500
891
170 520 100
700
50
60
914
630
665
60
570
50
914
700
60
700
50
60
914
630
665
60
570
891
170 548
500
100
50
914
700
60