Installation Guide

ManualsBrandsLa Crosse Technology ManualsGarden CenterWireless Thermometer with Trend

308-1410GR www.lacrossetechnology.com/support Page | 1

WIRELESS THERMOMETER

Get started

1. Insert 2 new AA batteries (not included) into the TX141-BV2 sensor.

Observe the correct polarity. The LED will flash when transmitting.

2. Insert 2 new AA batteries (not included) into the station. Observe the

correct polarity.

3. After 5 minutes, place the sensor outside in a shaded location.

Maximum range is 300 feet (91 meters) open air.

Buttons

2 “AA”

Model: 308-1410GR

Instruction Manual

DC: 092117

2 “AA”

SENSOR

TX-141-Bv2

LED

Summary of content (4 pages)

PAGE 1
Model: 308-1410GR Instruction Manual DC: 092117 WIRELESS THERMOMETER SENSOR TX-141-Bv2 LED TX 2 “AA” Buttons 2 “AA” Get started 1. Insert 2 new AA batteries (not included) into the TX141-BV2 sensor. Observe the correct polarity. The LED will flash when transmitting. 2. Insert 2 new AA batteries (not included) into the station. Observe the correct polarity. 3. After 5 minutes, place the sensor outside in a shaded location. Maximum range is 300 feet (91 meters) open air. 308-1410GR www.
PAGE 2
Set Time 1. 2. 3. Hold the SET/ºF/ºC button to enter time settings. To adjust values press the MIN/MAX/+ button. Press the SET/ºF/ºC button to confirm adjustments and move to the next item. Time setting order: 1. 12/24 Hour Time Format 2. Hour 3. Minutes Press the SET/ºF/ºC button to exit, or wait 20 seconds without pressing buttons to return to the normal time display. Fahrenheit/Celsius • Press the SET/ºF/ºC button to select Fahrenheit or Celsius display.
PAGE 3
• The maximum transmitting range to the wireless thermometer is over 300 feet (91 meters) in open air, not including walls. Search for Outdoor Sensor • Hold the MIN/MAX/+ button for 3 seconds to search for the outdoor sensor. Low Battery Icon Low battery icon indicates low battery for sensor or station. • If the icon is displayed in Outdoor Temperature section, replace batteries in the outdoor sensor. • If the icon is displayed in Indoor Temperature section, replace batteries in the station.
PAGE 4
• • • • • Replace all batteries of a set at the same time. Clean the battery contacts and also those of the device prior to battery installation. Ensure the batteries are installed correctly in regard to polarity (+/-). Remove batteries from equipment when it is not to be used for an extended period. Promptly remove expired batteries. Warranty and Support La Crosse Technology, Ltd.