Installation Guide

Page 3
Page 4
Page 2
WIRELESS WEATHER STATION
WITH THREE OUTDOOR SENSORS
MODEL: 30814123TXV2
DC: 103018
Full manual can be found under the Support tab here: bit.ly/308-1412-3txv2
POWER UP SETTINGS
1. Remove the battery cover from all three Outdoor Sensors.
Select a dierent Channel on each sensor.
2. Install 2-AA batteries (not included) into each Outdoor Sensor.
Replace battery covers.
3. Insert 2-AA batteries (not included) into the back of your
Weather Station.
4. Once each Outdoor Sensor is reading to your station, place it
outside in a shaded location.
Watch sensor mounting video: http://bit.ly/TH_SensorMounting
WWVB ATOMIC TIME SIGNAL
1 2 3
AA
AA
1 2 3
1 2 3
AA
AA
1 2 3
1 2 3
AA
AA
1 2 3
Channel 1 Channel 3
Channel 2
AA
AA
1. Hold the SET/MODE button to enter the Settings Menu.
2. Press the +/HI or -/LO button to adjust the flashing values.
3. Hold the +/HI or -/LO buttons to adjust quickly.
4. Press the SET/MODE button to confirm adjustments and move
to the next item.
5. Press the SEARCH button at any time to exit.
Settings menu order:
• Atomic ON | OFF
• DST ON | OFF (Daylight Saving Time)
• Time Zone
• 12H/24H
• Hour
• Minutes
• Year
• Month
• Date
• Temperature Fahrenheit/Celsius
Note: Day of the week sets automatically as Year, Month, and Date
are set.
Time Zones
• The station will automatically search for the atomic time signal at
UTC 7:00, 8:00, 9:00, 10:00, and 11:00.
• Press and release the SEARCH button to manually search for
the atomic time signal. Tower icon will flash.
• For information about WWVB Atomic Time visit: bit.ly/AtomicTime
DST Indicator: The letters DST will show below the Atomic Time
Icon during the months we observe Daylight Saving Time (second
Sunday in March to first Sunday in November).
CUSTOM DATE DISPLAY
• Press and release the SET/MODE button to display either the
full Weekday, or Calendar with Day, Month, and Date.
• The station will remain on the display chosen.
COMFORT
COMFORT
Outdoor Sensors
TX141TH-BCHv3
Weather Station
308-1412-3TXv2