User Manual

• The clock will automatically search at UTC 7:00, 8:00, 9:00, 10:00,
and 11:00.
• If there is no WWVB reception, the clock will search for the atomic
time signal every 2 hours until the WWVB time is received.
• After reception, this clock will only search for the atomic signal
after midnight.
• From normal time display hold the MINUS button for 3 seconds, to
search for the WWVB time signal.
• For information about WWVB visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm
Atomic Time Signal
LCD Features
1
4
3
2
1
Buttons (on top)
Displays Weekday or
Weekday/Month/Date
Atomic Time
MONTH
DATE
4
3
2
5
6
7
8
5
6
7
8
Atomic Time Reception Icon
Low Battery Icon
Snooze Icon Zz
Alarm Active Icon (bell)
Displays Date, Seconds or
Indoor Temperature
Setup
1. Insert 2 “AA” batteries into the
clock according to polarity
markings.
2. Set Time/Date
Note: The clock will search for
atomic time 2 hours after
batteries are installed.
AA
AA
Custom Display Modes
MONTH
DATE
• Press and release the MODE button to customize how the top and
right sections of the clock are displayed.
• The clock will stay in the mode selected.
MODE 1:
Weekday &
Month/Date
MODE 2:
Day/Month/Date
& Temperature
MODE 3:
Day/Month/Date
& Seconds
Settings: Language, Time, Date, etc.
• Hold the MODE button to enter time set mode.
• Press the + or - buttons to adjust the values.
• Press the MODE button to conrm adjustments and move to the
next item.
• Press the SNOOZE button at any time to exit.
Time set order:
1. Language (English or Spanish)
2. Beep ON/OFF
3. Atomic ON/OFF
4. Time Zone
5. DST ON/OFF
6. 12/24 Hour
7. Hour
8. Minutes
9. Year
10.Month
11.Date
12.Fahrenheit/Celsius
513-1419 www.lacrossetechnology.com/support Page | 1
Page | 2 www.lacrossetechnology.com/support 513-1419
DAY MONTH DATE
DAY MONTH DATE MONTHDAY DATE