User Manual
1. Hold the MODE button for 3 seconds to enter settings mode.
ENGLISH will show. Use the +/- button if you wish to select
ESPAÑOL (Spanish).
2. Press the MODE button to move to BEEP ON/OFF.
Use the +/- button to turn off the beep sound.
3. Press the MODE button to select atomic time signal ON/OFF.
Use the +/- button if you do not want atomic time reception.
5. Press the MODE button to select daylight saving time ON/OFF.
If you do not observe DST, use the +/- button to turn off the
Daylight Saving Time Indicator.
4. Press the MODE button to select your time zone.
Use the +/- button to adjust.
Note: If you choose OFF for atomic time, the clock will skip time
zone and DST setting and jump to 12/24 hour time.
AST = Atlantic
EST = Eastern
CST = Central
MST = Mountain
PST = Pacic
AKT = Alaska
HAT = Hawaii
6. Press the MODE button to select 12 hour or 24 hour time format.
Use the +/- button to adjust.
7. Press the MODE button to set the Hour.
Press the +/- button to adjust.
8. Press the MODE button to set the Minutes.
Press the +/- button to adjust. Hold to adjust quickly.
9. Press the MODE button to set the Year.
Press the +/- button to adjust.
10.Press the MODE button to set then set the Month.
Press the +/- button to adjust. Hold to adjust quickly.
11.Press the MODE button to set the Date.
Press the +/- button to adjust. Hold to adjust quickly.
12.Press the MODE button to select Fahrenheit or Celsius temperature
display. Press the +/- button to adjust.
13. Press the MODE button to conrm and exit.
Note: Press the SNOOZE button at any time to exit settings.
513-1419 www.lacrossetechnology.com/support Page | 3
Page | 4 www.lacrossetechnology.com/support 513-1419
IMPORTANT:
Please turn DST to OFF on this
clock. This function was reversed in
the programming.
Low Battery Icon
• The low battery icon will appear between the hour and minutes.
• This icon indicates it is time to replace the batteries.