Model: 616-146Av2 Quick Setup Guide DC: 111815 Atomic Projection Alarm Clock BUTTONS Snooze/Backlight Time, Alarm with Snooze Projection Arm Rotates 180° Indoor Temperature + Trends Moon Phase + Calendar Battery Compartment 2 “AAA” AC Power Jack HX-0501500U USB Charge Port 1A Model: 616-146A v2 www.lacrossetechnology.
GET STARTED Step 1: Insert the included 5-volt AC power adapter into the wall outlet then into the projection alarm. Step 2: Insert 2 new “AAA” batteries (not included) into the projection alarm. Observe the correct polarity. If the indoor temperature is not displayed after 60 seconds, unplug the AC adapter and remove batteries from the projection alarm, press a button 20 times. After 5 minutes, return to Step 1 above. SET TIME AND DATE 1. 2. 3. Hold the SET/°F/°C button to enter time set mode.
ACTIVATE / DEACTIVATE TIME ALARM • • • Press the ALARM button once to view alarm time. Press the ALARM button again to activate the alarm. Bell icon appears. Press the ALARM button again to deactivate the alarm. The bell icon disappears. Alarm Bell Icon SNOOZE (Silences alarm temporarily) • • • Press the SNOOZE/LIGHT button to silence alarm for 9 minutes. Zz will show. When in snooze mode, press ALARM to stop alarm for one day. Note: The alarm is crescendo sound.
PROJECTION (On/Off, rotate, projection mode) Battery Power: Press and release the SNOOZE/LIGHT button to show the projection for 10 seconds. Note: Using Battery power, the projection and backlight will come on for 10 seconds when SNOOZE/LIGHT is pressed. Projection will not display constantly when operating on battery power. A/C Power Projection ON/OFF: Projection is displayed constantly unless turned off. • Hold the +/PROJ button for 3 seconds to turn off the projection.
POSITION PROJECTION ALARM • • • The projection alarm has a wide base to sit on a desk or table. Choose a location 6 feet or more from electronics such as cordless phones, wireless gaming systems, televisions, microwaves, routers, baby monitors, etc., which can prevent signal reception. Position near an exterior wall that faces Ft. Collins Colorado for WWVB time signal reception.
WARRANTY AND SUPPORT La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. View full warranty details online at: www.lacrossetechnology.com/warranty_info.pdf For warranty work, technical support or other information contact out friendly support staff: La Crosse Technology, Ltd 2830 South 26th St La Crosse, WI 54601 Contact Support: 1-608-782-1610 Online Product Support: www.lacrossetechnology.
