Owners manual

Model: 616-146A v2 www.lacrossetechnology.com/support Page | 4
PROJECTION (On/Off, rotate, projection mode)
Battery Power: Press and release the SNOOZE/LIGHT button to show the
projection for 10 seconds.
Note: Using Battery power, the projection and backlight will come on for 10
seconds when SNOOZE/LIGHT is pressed. Projection will not display
constantly when operating on battery power.
A/C Power Projection ON/OFF: Projection is displayed constantly
unless turned off.
• Hold the +/PROJ button for 3 seconds to turn off the projection.
• Press the +/PROJ button to turn on the projection.
Rotate Projection:
• Press the PROJECTION button to rotate the projection image 90
degrees.
• Press the PROJECTION button again to rotate another 90 degrees.
Change Projection Modes: Hold, then release the PROJECTION button to
switch projection modes. Watch the projection image to view the changes.
• Time and Indoor Temperature: alternate every 5 seconds (default)
• Time
• Indoor Temperature
MANUAL WWVB RADIO-CONTROLLED TIME SEARCH
• Press the -/TIME button to start or stop a manual signal search. WWVB
Icon will flash
For information about WWVB visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm
TEMPERATURE TREND INDICATORS
The temperature (2°F/1°C) trend indicators update every 30 minutes or less.
• Temperature has
risen
in the past 3 hours.
• Temperature has not changed in the past 3 hours.
• Temperature has fallen in the past 3 hours.
LOW BATTERY ICON
If the icon is displayed in Indoor Temperature section,
replace batteries in the projection clock.
Low
Battery
Icon
WWVB
Icon