FAQ

14 | Page
• The station will search for 5 minutes every hour to reconnect with sensor.
• Be sure you have good batteries. Manually search for your sensor by holding the PLUS (+)
button for three seconds.
Try this:
• Bring your sensor within 10 feet of your station and make sure it is connected to the station.
• After 15 minutes move the sensor into the next room with a wall between the sensor and the
station for 1 hour.
• If there is no loss of signal in that hour, move the sensor just outside.
• Continue moving the sensor back to its original location.
• If you lose connection, look for sources of interference.
WHY ARE PARTS OF LETTERS OR NUMBER MISSING?
• This is generally a power related issue.
• Batteries may be overpowered or underpowered. Remove batteries from Rain station.
• Press any button 20 times. Leave the Rain station unpowered for 1-2 hours.
• Install fresh alkaline batteries with correct polarity.
WHY IS MY NEW RAIN STATION UNREADABLE?
• On a brand new rain station, check for thin plastic films of printed scratch guard that may be
on the screen. This thin piece of plastic has printed numbers for store displays.
• With all power removed the rain station should be blank.
• If numbers still appear, please check for scratch guard.
• Check that the batteries polarity is correct.
• This is generally a power related issue.
• Batteries may be overpowered or underpowered. Remove batteries from Rain station.
• Press any button 20 times. Leave the batteries out of the display for 2 hours.