Installation Guide

Model: 810-805 http://www.lacrosseclock.com/support Page | 2
GET STARTED
Step 1:
Insert 3 new “AA” batteries (not
included) into the Weather Radio.
Observe the correct polarity on the
battery compartment.
Step 2:
Turn On the Weather Radio.
Use the ON/OFF button located on
the right side of the radio.
Step 3:
Select listening mode. Use the
MODE button located on the left side
of the radio (AM, FM or WB).
Step 4:
Select station. Use the channel
UP/DOWN arrow buttons located on
the right side of the radio.
WEATHER ALERTS*
Press the MODE button to select Weather Band (WB) mode.
The radio must be in WB mode to receive alerts automatically.
DURING AN ALERT:
• The LCD Backlight will change from BLUE to RED and will flash.
• The top red LED light will also flash (every 2 seconds for 5 minutes).
• The volume will increase to maximum level 16 for 5 minutes.
Use the VOL buttons (▲▼) to adjust the volume.
• When alert sounds, press and hold the MODE button to place radio back to
WB standby.
STANDBY:
• When in WB mode, hold the MODE button for 2 seconds to enter WB
Standby.
• When in Standby, the red LED on top will slowly flash (every 5 seconds).
RED LED LIGHT (on top)
• Will flash every 2 seconds during weather alert.
• Will flash every 5 seconds in WB standby mode.
LCD BACKLIGHT
• Blue backlight turns on for 10 seconds for any button press.
• Backlight will change to RED Color and flash during a weather alert
(every 2 seconds for 5 minutes).
AM/FM RADIO MODES
1. When the radio is ON, press the MODE button toggle between:
AM radio // FM radio // WB radio
2. Use the CH buttons (▲▼) to select the station.
3. Hold the CH buttons to search for the next available station.
4. Press the VOL buttons (▲▼) to adjust volume.