Installation Guide

Model: 810-805 http://www.lacrosseclock.com/support Page | 3
TELESCOPING ANTENNA
• Fully extend the telescoping antenna to receive a steady strong signal.
• Place the radio near a window if you are indoors for best reception.
WHITE LED FLASHLIGHT HI/LOW/OFF
• Press and Hold the LIGHT button to turn ON at high intensity (100%).
• Press and Hold again to turn to low intensity (5%).
• Press and Hold a third time to turn the light OFF.
OPTIONAL A/C POWER CORD
• Plug 6.0V adapter (not included) into the wall outlet and into the DC power
port on the side of the radio.
• Turn radio on, select mode and station, then adjust volume.
OPTIONAL EARPHONES
• Plug in a set of 3.5mm earphones (not included) into the earphone jack to
listen privately to the radio.
DISCLAIMER
* Disclaimer: La Crosse McCormick, LLC. (“La Crosse”) provides various alert
options to aid users. La Crosse shall not be liable for accuracy, usefulness or
availability of information transmitted via the service. Users are solely responsible
for damages to persons or property by service use.
CARE AND MAINTENANCE
• Do not mix old and new batteries
• Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
• Radio is not waterproof.
• Extreme temperatures, vibration, and shock should be avoided to prevent damage to
the units.
• Clean with a soft, damp cloth. Do not use solvents or scouring agents; they may mark
the radio.
• Do not submerge the weather radio in water.
• Opening the casing invalidates the warranty. Do not try to repair the unit.
• Do not leave in vehicle in extreme temperatures.
WARRANTY: 1-Year Limited Warranty
La Crosse McCormick, LLC warrants that if the accompanying product proves to be
defective to the original purchaser in material or workmanship within 1-year from the
original retail purchase, La Crosse McCormick, LLC will, at La Crosse McCormick, LLC ’s
option, either repair or replace same without charge (but no cash refund will be made).
SERVICE PROCEDURE
Please follow the procedure below to ensure the radio is properly serviced and returned.
Failing to follow the procedures may result in delays or loss of product.