PROJECTION ALARM CLOCK with 2 AMP USB Charging and FM Radio SET UP GUIDE MODEL: 817-2410 | 817-83957
Power Up 1. Insert the 5.0 volt power adapter into an outlet, then into your clock. Optional: Insert a CR2032 battery (not included) for backup. 2. Enter the Settings Menu to set Time. Optional CR2032 (not included) 5.0 V adapter (included) Settings Menu 1. Hold the 2. Press the 3. Press the button to enter the Settings Menu. or button to adjust the values. Hold to adjust quickly. button to confirm and move to the next item.
Settings Menu Settings Menu Order: • Hour • Minutes • Snooze Duration (NO5) 5-60 minutes Note: When setting the Hour, the “P” will show to indicate PM hours. FM Radio 1. Extend the antenna for best reception. 2. Press the button to listen to the radio. ON will show briefly, followed by the frequency in MHz. 3. Press the station. or button to select station. Hold to search for next clear 4. Press (1-16). to view Volume Setting. Use 5. Press to turn radio off.
FM Radio Auto Scan and Store Preset Stations: 1. Press to listen to the radio 2. Hold to automatically scan and set up to 20 stations. Manually Store Preset Stations: 1. Press the button to listen to the radio. ON will show briefly. 2. Press the or button to select station. 3. Hold until P01 flashes to store as Preset 1. 4. Repeat steps 2 and 3 to set up to 20 Preset Stations. Note: You can change preset stations with the above instructions. Listen to Preset Stations: 1.
Time Alarm This Projection Clock has a dual time alarm function. Use the following instructions to set your alarm times, choose your wake up sound (buzzer or radio), and alarm volume if you choose the radio option. Set Alarms: 1. Hold the 2. Press the button to enter the Alarm Settings. or button to adjust the values. Hold to adjust quickly. 3. Press and release the 4. Press the button to confirm and move to the next item. button anytime to save and exit.
Time Alarm Activate/Deactivate Alarm 1 & 2: 1. Press the button to activate or deactivate Alarm 1 and/or Alarm 2. 2. The Amber LED Light next to the Turn Off Sounding Alarm: When alarm sounds, press the hours. or indicates that alarm is active. button once to stop the alarm for 24 Snooze: When an alarm is sounding, press once, the alarm will be silenced and come on again after the custom snooze duration selected.
Projection Projection Image Rotation: 1. Hold the button to turn Projection 180 degrees. 2. Turn the Projection Wheel on the back of the Projection Arm to adjust the projected image 90 degrees. Projection Wheel Note: The Projection Wheel will rotate to allow you to correctly project the time onto your wall or ceiling. USB Charging • Make sure the original adaptor (5V-2A) enclosed with your clock radio is being used to power your clock radio.
Adjustable Backlight Select High or Low: Press the button to select High or Low backlight. Backlight will dim but does not turn off. Adjust Low Brightness: Rotate the Dimmer Wheel on the side of your clock to adjust the brightness of the Low setting. The High setting is not adjustable. Dimmer Wheel to adjust Low Backlight Mood Light Mood Light The Mood Light glows below the clock, offering a gentle amber glow. Press the button to turn this light on or off.
We’re Here to Help Specifications If you require additional support, get in touch with our friendly customer support team based in La Crosse, WI. Projection Alarm Clock (817-2410 | 817- 83957) Phone: 1.608.782.1610 Online: bit.ly/contact_techsupport Our knowledgable customer support team is available: Mon-Fri 8am-6pm CST Care + Maintanence Do not mix old and new batteries. Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
Warranty Info La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. La Crosse Technology, Ltd, 2830 S. 26th St. La Crosse, WI 54601 For Full Warranty Details, Visit: www.lacrossetechnology.com/pages/warranty Canada Statment This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
