L I G H T A LA R M C LO C K LIGHT ALARM CLOCK SET UP GUIDE MODEL NUMBER C79141
Table of Contents BASICS ALARMS LIGHT MODES Initial Setup 02 Natural Light Alarm 07 Selecting Your Light Mode 11 Buttons & Ports 03 Setting the Light Alarm 08 Color Cycle Mode 12 LCD Display 04 Setting the Sound Alarm 09 Evening Mode 13 LCD Display Brightness 05 Snoozing the Sound Alarm 10 Guided Breathing Mode 14 Auto-Dim Settings 05 Comfort Meter Mode 15 USB Charging Port 06 Color Select Mode 16 Temperature & Humidity 06 Glow Color Options 16 APPENDIX SUPPORT Speci
BASICS Initial Setup Power Up Insert the 5V Power Adapter into an outlet, and then plug it into the AC Jack on the bottom of the alarm clock. Next, remove the Insulation Tab from the Battery Compartment. A greeting will appear on the LCD display and then your clock will move into the Settings Menu. The Color Cycle Light Mode will also begin.
BASICS Buttons & Ports 7 6 8 9 1 3 2 1. DISPLAY ( ) Tap to adjust backlight intensity or hold to enter Auto-Dim settings 2. PLUS/MINUS (+/-) Tap to control glow light intensity or hold to adjust quickly 3. SNOOZE ( ) Tap to snooze the sound alarm, exit menus, or to turn the light off 4 5 4. LIGHT ( ) Tap to toggle through light modes. Tap to confirm light mode selection 5. USB CHARGING PORT Connect USB charging cable (not included) 6.
BASICS LCD Display AM/PM Indicator 1.3-Inch Time Digits Low Battery Indicator Auto-Dim Indicator Weekday Indoor Temperature (°F/°C) Indoor Humidity Light Alarm Indicator and Alarm Frequency Month & Date Sound Alarm Indicator and Alarm Frequency Light and Sound Alarm Frequencies Daily Weekday (Monday-Friday) Weekend (Saturday & Sunday) Set a Daily, Weekday, or Weekend Alarm Daily Weekday (Monday-Friday) Weekend (Saturday & Sunday) Notes: Only one light and one sound alarm can be programmed.
BASICS LCD Display Brightness Adjusting the LCD Display Brightness Tap the button to adjust the backlight intensity. There are 4 brightness levels, plus an off option. Auto-Dim Settings Program your LCD display to automatically dim during preselected times. 1. Hold the button to enter the Auto-Dim Settings Menu. 2. Tap the +/- buttons to turn the Auto-Dim feature on or off. Tap to confirm. 3. Tap the +/- buttons to adjust the start time. Tap to confirm. 4. Tap the +/- buttons to adjust the stop time.
BASICS USB Charging Port There is a 1 Amp USB Charging Port located on the right side of your alarm clock. • Connect your external device’s USB charging cable (not included) into the USB Charging Port. • Charging times will vary. • USB Power Output: 1 Amp Maximum Current Temperature & Humidity View real-time indoor temperature & humidity data on your alarm clock. Fahrenheit Celsius You can select Fahrenheit or Celsius in the main Settings Menu.
ALARMS Natural Light Alarm The Soluna Light Alarm Clock is equipped with a glowing Light Alarm that simulates the sunrise. Use the Light Alarm to wake up peacefully and help reset your circadian rhythm. Gradual Wake Up The Light Alarm will begin 30 minutes before your set alarm time. The light will gradually increase in intensity until reaching full brightness at your set alarm time. The light will remain on and at full power until a button is pressed.
ALARMS Setting the Light Alarm ALARM FREQUENCIES Setting the Light Alarm 1. Hold the button on the back of the clock to enter the Light Alarm Settings Menu. DAILY ALARM will appear on the LCD. 2. Use the +/- buttons to select your alarm frequency. Choose from Daily (1-7), Weekday (1-5), or Weekend (6-7) options. Press to confirm. 3. Next, Use the +/- buttons to set your desired time. Press to confirm. 1-7 Daily Alarm (Monday–Sunday) 1-5 Weekday Alarm (Monday–Friday) 4.
ALARMS Setting the Sound Alarm ALARM FREQUENCIES Setting the Melody Sound Alarm 1. Hold the button on the back of the clock to enter the Sound Alarm Settings Menu. DAILY ALARM will appear on the LCD. 2. Use the +/- buttons to select your alarm frequency. Choose from Daily (1-7), Weekday (1-5), or Weekend (6-7) options. Press to confirm. 3. Next, Use the +/- buttons to set your desired time. Press to confirm. 4. Next, use the +/- buttons to set your desired snooze duration (5 to 120 minutes).
ALARMS Melody Sound Alarm Gradual Wake Up The gentle Melody Sound Alarm will increase in volume over a 5-minute period. After the 5-minute time frame, the alarm will stop if not snoozed or turned off. To turn off a sounding alarm, press any button besides the snooze button ( ). Example: 7:15 7:16 7:17 7:18 7:19 7:20 Based on 7:15am alarm time Snooze Duration Countdown After the snooze button is pressed, the snooze duration countdown will appear on the LCD.
LIGHT MODES The Soluna Light Alarm Clock features 5 light modes with 20 unique color options, ensuring there’s a glow for every day and mood. Selecting Your Light Mode 1. Tap the button to toggle through the different light modes. 2. Use the +/- buttons to adjust any additional glow color options within the Guided Breathing and Color Select modes. 3. There are 2 ways to confirm your selection and start the light mode. Either tap the button or simply wait 5 seconds. The selected light mode will then begin.
LIGHT MODES Color Cycle Mode When using the Color Cycle Mode, the light will gradually shift through all of the glow color options. How to Activate Color Cycle Mode 1. Tap the button to toggle through the light modes. CYCLE will appear on the LCD. 2. There are 2 ways to confirm your selection and start the light mode. Either tap the button or simply wait 5 seconds. The Color Cycle Mode will now begin. Color Cycle Example Color Cycle Examples Use the +/- buttons to adjust the light’s brightness level.
LIGHT MODES Evening Mode The Evening Mode is a 30-minute cycle designed to simulate the setting of the sun. Simply start the mode before bed and the light will gradually dim and shift in color while you fall asleep. How to Activate Evening Mode 1. Tap the button to toggle through the light modes. EVENING will appear on the LCD. 2. There are 2 ways to confirm your selection and start the light mode. Either tap the button or simply wait 5 seconds. The Evening Mode will now begin.
LIGHT MODES Guided Breathing Mode The Guided Breathing Mode will walk you through a 10-minute deep breathing exercise. Simply inhale and exhale as the colors change. To further assist you, the LCD will also display your inhale and exhale times. How to Activate Guided Breathing Mode 1. Tap the button to toggle through the light modes. BREATHING will appear on the LCD. 2. Use the +/- buttons to choose the glow color. Select from three options: Energy, Warmth, or Calm. 3.
LIGHT MODES Comfort Meter Mode In the Comfort Meter Mode, the color changes according to the current indoor humidity level, so you can monitor the comfort of your home at a quick glance. How to Activate Comfort Meter Mode 1. Tap the button to toggle through the light modes. COMFORT will appear on the LCD. 2. There are 2 ways to confirm your selection and start the light mode. Either tap the button or simply wait 5 seconds. The Comfort Meter Mode will now begin.
LIGHT MODES Color Select Mode Use the Color Select Mode to choose your favorite glow color. How to Activate the Color Select Mode button to toggle through the light 1. Tap the modes. PICK COLOR will appear on the LCD. 2. Use the +/- buttons to choose your glow color. Glow Color Options 3. There are 2 ways to confirm your selection and start the light mode. Either tap the button or simply wait 5 seconds. The Color Select Mode will now begin.
APPENDIX Specifications 6.71-in. (17.04 cm) 6.81-in. (17.30 cm) 2.69-in. (6.84 cm) Power Requirements: Primary Power: 5.0V Power Adapter (Included) AC6: HX12H-0501500-AU-001 The plug on the power adapter is intended to serve as the disconnect device, the socket-outlet shall be installed near the equipment and shall be easily accessible. Battery Backup: 1 “CR2032” Coin Cell Battery (Included) In the event of a power outage, the Battery Backup will keep time.
APPENDIX Warranty La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product, relating to manufacturing defects in materials and workmanship. For full warranty details, you can visit: www.lacrossetechnology.com/support La Crosse Technology, Ltd • 2830 S. 26th Street • La Crosse, WI 54601 Battery Warning WARNING 1. This product contains a button battery. 2. If swallowed, it could cause severe injury or death in just 2 hours.
APPENDIX Caution! Canada Statement The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or modifications to this equipment. Such changes or modifications could void the user authority to operate the equipment. This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: All rights reserved.
APPENDIX FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
SUPPORT Having Trouble? We’re here to help. For detailed product videos, manuals, and more, visit our support website: www.lacrossetechnology.com/support Make sure you have your product’s model number handy (C79141) Need Additional Support? Call our Friendly Customer Support Representatives Phone Number: 1.877.408.2678 Representatives are available Monday-Friday, 8:00am to 6:00pm CST Factory Reset Stay in Touch Ask questions, watch set up videos, and provide feedback on our social media outlets.
COMFORT MORNING WHAT’S YOUR GLOW? EVENING METER WARMTH CALM ENERGY NIGHT GARDEN NIGHT PURPLE WHITE DARK BLUE FOREST CYAN OCEAN GARDEN PURPLE WHITE DARK BLUE FOREST CYAN OCEAN FIRE WARMTH YELLOW SUN GREEN ORANGE RED ENERGY YELLOW SUN GREEN ORANGE COLOR CYCLE FIRE EVENING CALM RED METER COMFORT MORNING WHAT’S YOUR GLOW? COLOR CYCLE
